1) performance:

1. Applicable to all imported and domestic flat offset presses, any PS plate and CTP plates. New and old, truly free alcohol (zero alcohol) printing.
2. It is not necessary to adjust the printing equipment and the temperature of the water tank. The machine is ready for use. The conditions for use are the same as for alcohol printing.

Compared to printing with alcohol, it is easier to achieve the balance of water and ink, the operation is simple and convenient, and the color is more realistic.

3. In the high temperature environment of the outside world, the thickness and continuity of the water film on the printing plate can be smoothly printed without adding alcohol.

4, super buffer system. Ensure that the pH is stable between 4.4-4.8, suitable for soft and hard water.

5, the working fluid surface tension is 32-38dye/cm, a small amount of ink can be achieved clear printing points, vivid colors, big ink position can be stable and stable printing.

6. Contains water-retaining substance, and it can be turned on again without any dirty after shutdown to reduce waste. .Antiseptic, anti-calcium, non-toxic, non-foaming, non-clogging pipes.

7, start fast and stable ink-water balance, effectively prevent the "dry" and other issues.

2) Alcohol-free Fountain Solution Brand Technical indicators:

1. No need to add IPA or other additives during use

2, product neutrality

A, high-fidelity fountain solution: in the printing process can make the original more realistic copy

B, VOC-free fountain solution: fountain solution does not contain VOC (refer to the German DIN 55649-2000 standard) ingredients

C. All non-alcoholic fountain solution: no need to add alcohol in the process, instead of the reduction of alcohol fountain solution on the market

3, for a variety of offset printing machine models

4. Without damaging the water roller and printing components, the rubber roller will gradually soften, the service life will be significantly extended, and the maintenance cost will be reduced.

5, in line with the Ministry of Environmental Protection of toys, food, packaging, primary and secondary school textbooks supplementary green lithography HJ2503-2011 standard. No adverse effect on the ink roller water roller.

3) environmental protection:
1, in line with environmental protection HJ2503-2011 standards, through the standard certification.
2, non-toxic, odorless, can improve the air quality in the workshop.

4) innovation:

1, no need to add alcohol, reduce water, reduce ink can reduce production costs.
2, can significantly improve the quality of printed products, ink saturated ink, clear and bright outlets.
3, ink drying speed, improve production efficiency.

5) security:

1, flame retardant, eliminate fire hazards.

2, no damage to the equipment roller.

6) stability:

1, a wide range of applications, compatible with the water quality of various regions.

2, easy to use, dampening device stability.

Under normal condition of all data of the machine,There is no need to Purpose-adjust the machine. Mix 3%-4% of

the original liquid with water then you can use it. Domestic machines and Japanese machines add about

3% ,German machines add about 4%, Tank temperature adjustable to 8 ℃ ~ 10 ℃, the PH value between 5.2 to

5.8, conductivity around 800 Ω ~ 1200 Ω ,There is no need to lower the temperature of the tank.Conditions of use

are the same as when printing with alcohol. Wash water tank frequently during use, keep water tank clean,It is best

to install a sink recycling filter cotton ,Preventing ink and paper scraps from entering after printing and it will

change the electrical conductivity of the water tank,Start up can print smoothly,The value is adjusted according to

the actual operation: Proper adjustment of dampening roller clearance and speed.

factory shows

competitive advantag

Packaging & Shipping