Our Doctor Blade is made of High Quality Carbon Steel with steel grade SH4. Specification is:
| 0.15x30mm |
| 0.15x40mm |
| 0.15x50mm |
| 0.15x60mm |
The above DB is 100M/box, lamella 0.07x1.3mm
| 0.20x50mm |
| 0.20x60mm |
The above DB is 100M/box, lamellar 1.0x1.3mm
Packed in foam plastic box sealed with film.
Our DB is used widely in flexo or gravure printing m/c to scratch the excessive printing ink radically on the surface of the anilox, suitable for medium or low speed machine.
We also have high quality DB suitable for high speed flexo or gravure printing m/c, steel coil is from Uddeholm, Sweden.
More technical specification, you may refer directly to the packing box picture.
